|
The Whirlpool® QuietPartner™ line features 3-speed models at every capacity. The fan control allows you to set the unit on Turbo to cool a room quickly. Once the room has been cooled down, you can then set the unit to Low or to the desired setting for quieter operation while the air conditioner maintains the desired temperature.
All Whirlpool® Air Conditioners feature an adjustable thermostat that allows you the ability to control the temperature in the room. This thermostat also has numbered settings that allow for easy resetting to your favorite temperature every time.
Most Whirlpool® Air Conditioners allow you to control the air flow direction both horizontally and vertically.
the new Omni-Flo™ air direction control incorporates revolutionary elliptical discs that deliver multi- directional air flow. By simply adjusting the louvers, you can direct the air to areas in the room where the cool air is needed most.
DesignerStyle® and QuietPartner™ Room Air Conditioners offer consumer-preferred filter access.
The EZ-Access™ filter allows you to remove the filter by simply sliding the filter in the front of the air conditioner in either direction, clean it and replace it. Once this process is complete, simply slide the filter into the front panel and the air conditioner is ready to operate again. No more struggling to remove and replace the front to change the filter.
The Insta-Mount™ window mounting hardware and durable framed side curtains make installing these room air conditioners a snap while providing safety and security for your family.
| Dimensions: |
Depth with Front 17 1/2 in. |
| |
Height with Base 13 3/4 in. |
| |
Width 21 1/3 in. |
| |
Window Opening - Minimum Width 25 in. |
| |
Window Opening - Maximum Width 38 in. |
| |
Window Opening - Minimum Height 16 in. |
| Dimensions shown are for planning purposes only. For complete information, see Installation Instructions packed with product. |
| |
| Electrical Requirements: |
15A, 115V, 60HZ, AC-ONLY |
| |
USE COPPER WIRE ONLY |
| |
With A Plug, GROUNDED CIRCUIT IS REQUIRED |
| A TIME-DELAY FUSE OR CIRCUIT BREAKER AND SEPARATE CIRCUIT IS RECOMMENDED |
|
|
